Certainly! After plugging the sterilizer and dryer into a 120V power socket and turning it on, you can select either the single sterilization or drying cycle. This allows the device to only sterilize or dry items as needed.
Here are the steps for setting up a single-cycle operation:
1. Press the On/Off button to turn on the sterilizer and dryer.
2. Rotate the knob and press the start/pause button to choose the mode.
3. Rotate the knob and press the start/pause button again to select the desired single feature: Sterilize or Dry.
4. Press the start/pause button, rotate the knob to set the operation time, and then press the start/pause button once more to initiate the cycle.
Once the device finishes the cycle, it will automatically shut off.
