1. Installation
| Remove the drain pipe and insert the interface end into the outlet pipe at the rear of the cleaning. | Insert the power cord into the power cord port of the machine. |
2. Connection
Place the other end of the drain pipe in a suitable drain container or sink.
3. Add Water to the Tank
Method 1: Open the tank cover and add an appropriate amount of purified water or distilled water to the tank.
Method 2: Directly remove the water, and add an appropriate amount of washing water, and then put the water tank back.
Note: When adding water, it is recommended to fill the water up to the designated water level in the tank. The amount of water added should not be lower than the minimum scale line "MIN".
