1. Installation
Assemble the washing rack from the bottom up as shown in the diagram. (Note: Ensure the rack is fully assembled before starting a wash cycle.)
| A. Install the lower spray arm securely in place. | B. Install the lower rack in the correct orientation. |
| C. Install the bottle holders and nipple holders in the positions shown in the diagram. | D. Install the connecting shaft according to the correct method. |
| E. Install the upper spray arm securely in place. | F. Install the upper rack in the correct orientation. |
Take out the drain hose and connect its end to the water outlet port on the back of the bottle washer. Plug the power cable into the socket on the product.
2. Connection
Place the other end of the drain hose into a suitable drainage container or sink.
3. Filling the Water Tank
Method 1: Open the water tank lid and pour an appropriate amount of purified or distilled water directly into the tank.
Method 2: Remove the water tank, fill it with an appropriate amount of water, and then return it to its original position.
Tip: When adding water, ensure the water level reaches the MAX fill line indicated on the tank.
