1. Place Items:
Correctly place the items to be cleaned according to the instructions：Item Placing Instructions of Momcozy DeepClean Lite Baby Bottle Washer and Sterilizer|BW04
2. Add Detergent:
Before cleaning, drop 1 detergent tablet directly into the cleaning chamber.
3. Add Water to Tank:
Add an appropriate amount of clean water to the water tank. The water level must be between the MIN and MAX marks.
4. Start Machine:
Connect the power supply, then press and hold the " " to start the device.
5. Select Mode:
- The default mode upon startup is: Normal Wash + Sterilize + Dry + Storage.
- Press the "
" to cycle through [Rapid Wash / Normal Wash / Cancel Wash].
- Press the "
" to enable or cancel the sterilization function.
- Press the "
" to enable or cancel the drying function.
- Press the "
" to enable or cancel the storage function.
6. Start Operation:
After selecting the mode, press the " " once to begin operation.
7. Retrieve Items After Completion:
After the drying cycle ends, the interior will be hot. To prevent burns, wait approximately 10 min before removing items.
Important Notes:
- Before pressing any buttons, ensure your hands are dry to avoid accidental operation caused by moisture.
- To stop operation, press and hold the "
" for about 2s. The device will stop working after automatic drainage.
- If you need to add items during operation, first press the "
" to pause, then open the top lid to add items.
- The Drain Hose should extend horizontally, and its end must not be positioned above the midpoint of the machine's height.
- Do not use detergents that produce excessive foam (such as dish soap), as this can cause overflow or program errors. We recommend using only the dedicated detergent tablets.
- Do not add water directly into the cleaning chamber, as this may cause malfunctions.
- During the cleaning or drying process, the Drain Hose and the exhaust vent on the Top Cover may become hot; do not touch them to avoid burns.
Cleaning Duration Description
| Function | Program Description | Program Duration | Max. Water Temperature |
|---|---|---|---|
| Rapid Wash | Hot water washing (Requires one Momcozy detergent tablet) | 19 min | 55℃ |
| Normal Wash | Hot water washing (Requires one Momcozy detergent tablet) | 29 min | 68℃ |
| Steam Sterilization | Steam sterilization | 10 min | 100℃ |
| Drying | Hot air drying | 60 min | / |
| Fresh Air Storage | Fresh air circulation and filtration, ensuring bottles remain dry and odor-free for extended periods. | 72 hours | / |
Other Notes | |||
|
The device defaults to the [Normal Wash + Steam Sterilization + Drying + Storage] combination mode upon startup. Users can individually activate or cancel any mode based on their needs. The system will automatically calculate the total running time based on the selected modes. During steam sterilization and drying, the surface temperature of the bottles may exceed 80°C. Allow the bottles to cool before removing them for use to avoid burns. | |||
Note: The maximum temperature for sterilization and storage may vary slightly with changes in altitude. The device will intelligently adjust the drying duration based on the ambient temperature, automatically extending the default drying time by 0–30 minutes to ensure optimal drying results.
After cleaning and sterilizing bottles, breast pump parts, and other items, if not for immediate use, activate "Fresh Air Storage" mode. The device will automatically cycle between hot air drying and cool air exchange for up to 72 hours, keeping the bottles consistently dry, fresh, and odor-free.
The system operates intermittently, achieving energy savings without worrying about excessive power consumption.
