It is crucial and essential to clean and maintain the baby bottle washer for long-term use.
1.Cleaning
1.1Exterior Cleaning
Use a soft, damp cloth to wipe the exterior of the main unit, top cover, water tank, and water tank lid.
1.2Cleaning Chamber Cleaning
- Disassemble in the following order, vertically upwards: Upper Spray Arm → Upper Rack → Central Water Column → Lower Rack → Lower Spray Arm.
- If large food particles are trapped in the filter, use a screwdriver to gently lift and remove the filter for cleaning.
- Rinse components such as the Upper Spray Arm, Upper Rack, Lower Rack, Lower Spray Arm, and Filter.
1.3WaterTank Inlet Cleaning
To maintain hygiene and prevent mold growth, it is recommended to clean the water inlet (located at the connection point between the water tank and the base) at least once a month. Use a cotton swab dipped in food-grade citric acid solution to gently wipe the inlet and its surrounding area. Ensure the area is completely dry before reinstalling the water tank.
2.Maintenance
Installation: Install the components in the reverse order of 1.2.
Air Filter Replacement：
- Lay the machine on its side and use your hand to pry open the clips on the filter cover.
- Remove the old HEPA filter.
- Place the new filter into the slot.
- Secure the filter cover.
