Please charge the breast pump before first use. The breast pump is powered by an internal rechargeable lithium battery.
Our products are packaged with a Charging cable (USB2.0/Type-C line) but not with a power adapter. Please purchase the power adapter by yourself before charging. Make sure to buy the power adapter which matches the USB 2.0 interface, and please make sure the input power of the power adapter is AC 100-240V 50/60 Hz and the output power is DC 5V=2A. (For double pumps charging, the output power of power adapter is DC 5V=3A)
- When the first battery indicator bar flashes, it means the battery is low, and there are 30 minutes of use time left (with the Warming function turned off)
- Battery performance varies depending on selected mode：
Standard pumping mode: up to 10 cycles
Warming mode: up to 6 cycles
Warming + Massage mode: up to 6 cycles
Each cycle is up to 30 minutes
Charge the battery as below：
a. Insert the USB end of Charging cable into the USB interface of power adapter;
b. Insert power adapter plug into AC socket;
c. Insert the Type-C end of Charging cable into the charging port.The 2-in-1 USB-C cable is for charging only.
Caution:
- The breast pump cannot be used during charging!
- The charging cable is only used to connect between the power adapter and breast pump unit for charging.
- Never charge the breast pump with a damaged USB power cable.
- Make sure the output of the power adapter is DC 5V 2A for directly pump charging.
- Please charge the device every three months to avoid battery damage due to low voltage for a long time.