The theme of this article is the instruction for use of Momcozy S12 Pro Quick wearable breast pump.
This article contains the following sections:
1. Preparations before pumping
1.Preparations before pumping
please refer to:Preparations before pumping
2.Assembling the Pump
- Make sure you have cleaned and disinfected the parts of the breast pump that come into contact with milk or breast.please refer to:Cleaning and Disinfection of S12 Pro Quick Breast Pump.
- Only start assembling the breast pump when disinfected parts have cooled down.
- Wash your hands before you touch breast pump parts and breasts to prevent contamination. Avoid touching the inside of milk collection set.
3. Pumping instructions
- Before you remove the pump body from your breast, always switch off the breast pump to release the vacuum.
- Do not continue pumping for more than 5 minutes at a time if you do not succeed in expressing any milk. Try to express at another time during the day.
- If the process becomes very uncomfortable or painful, stop using the pump and consult your healthcare professional.
- Monitoring milk level during pumping to ensure overfill does not occur.
1)Alignment
a. Before pumping, please make sure the pump is pressed tightly on your breast without a gap.
b. To align, hold the flange against your breast so you can see if your nipple is centered in the flange tunnel. You may need to bend forward.
c. After you've aligned, look through the flange to confirm your nipple is centered before pumping. The tip of your nipple should NOT touch the top,sides or bottom of the flange tunnel. If it does, try again.
2)Secure Pump in Bra
Secure Pump in place by bra,taking care to keep pump pressed firmly againsast. If necessary, tighten the bra to keep pump securely in place and start pumbing
3)Starting pumping
Do not slide pump directly into your bra, follow step-by-step instructions.
Disconnect from Charger before use.
| A. Turn on the pump | Long press the On / Off button for 2s to turn on the pump. ·The default mode is Stimulation mode when you first use the pump. ·The default vacuum level is level 1(at this time, the suction level LED display 1 as level 1). |
| B. Select the mode | Modes: Stimulation Mode & Expression Mode & Mixed Mode When you first use the pump, the default setting is level 1 suction strength of Stimulation mode. Memory function: The pump will start with the level 1 suction strength,remember previous mode when you use it next time. Short press the Mode Selection button to change from 3 modes. |
| C.Select the vacuum level |
Momcozy pump has 9 vacuum pressure settings for each mode, giving you control over what feels comfortable and works most efficiently in all modes. Once you can feel the vacuum pressure on your nipples, use the Increase / Decrease button to adjust the vacuum pressure to find your preferred setting in three modes. The LED display will be off after no operation for 60 seconds, press any button can activate the LED display again. |
Tip: A higher vacuum pressure does not always mean a higher volume of milk.
4)Remove the pump
- Use your finger to break the seal between the flange and the breast tissue.
- Lean slightly forward to remove the pump from the breast after your pumping session, then keep the flange opening side up to prevent milk from pouring over.
5)Pouring milk
Do not open the flange directly to pour milk, as it may cause the rmilk to enter the main unit and result in damage!
Please turn off the breast pump first, remove the main unit, and pour out the breast milk from the milk outlet on the top of the Milk collector.
After finishing the milk collection, please pour the newly expressed miIk into other milk collectors with caps or milk storage bags in time. Screw the cap tighty onto the other Milk collector and store the milk.
The milk collectors provided are for collecting the milk during pumping.If you need to feed the baby or store the expressed breast milk, please use another milk collector with a cap.
Caution:
- Momcozy pump does not support use while charging. Alwaysdisconnect from the charger and close the charging cap before use.
- Momcozy pump should not be used while lying down, engaging in strenuous activities or performing activities with risk of harm.
- Using a breast pump should not cause pain. Do not try to express with a vacuum pressure setting that is too high or uncomfortable. If excessive discomfort or pain is felt during pumping, stop pumping,break the seal around your nipple and discontinue the session.
