Function Description of the Menu:
| Menu Options | Descriptions |
|
Brightness |
Explanation: Adjust the brightness of the monitor screen with 10 levels of brightness. Operation: Click this icon and click "OK", then adjust the brightness by < and > button. |
|
VOX |
[VOX mode] When it is selected, the Baby Monitor's screen and audio activate if noise exceeds your preset level. [VOX level] Sensitivity can be adjusted from 1 to 5, with the default being 3. [Power-saving] When you enable power-saving, the monitor will l enter power saving mode. Note: When your device enters power saving mode, your screen may light up and the signal maybe slightly delayed. |
|
Alert |
[Sound Detection] Enable to alert you if there is an abnormal sound coming from nearby your baby. When the sound around the camera exceeds your set value, the monitor will sound an alarm to alert you. (Note: surrounding noise may cause false alarms) [Temperature Detection] when the ambient temperature is higher/lower than your set temperature, the monitor will sound an alarm. [Alert Duration] Support to set to 5s-30s. [Alert Volume] Support to choose the level: mute/low/medium/high |
|
Camera |
[Add camera]: Each baby monitor can connect up to 4 cameras simultaneously [Delete camera] [Display mode]: "Full screen": Only display one camera scene. "Split-screen": Only support in multi camera connection, and the scenes can be check at the same time. "Auto cycle": Only support in multi camera connection, and different scenes will be display one by one from different cameras. Duration of each scene can be set 5s to 30s. [Camera volume]: Adjust the sound volume emitted by the camera. [Auto record]: Choose"Off", "Continuous recording", or "Motion detection recording". When "Motion detection recording" is selected, the camera will automatically record for 10 minutes when it detects dynamic movement from the baby. Recording is disabled if the picture remains still. [Playback]: View historical videos and images on the monitor. Note: Only supports Class 10 memory cards; recommended to use the official brand's matching memory card. The larger the memory card capacity, the more videos/images can be stored; when exceeding storage space, historical videos/images will be automatically cleared. This function needs to be used with the camera in a connected state. [SD card settings]: View memory card capacity information or format the memory card. [Screen flip]: When you select "Reverse 180°", the image coming from the camera will be rotated 180°.
|
|
Lullaby |
Choose the desired lullaby to help the baby sleep. Adjust the volume using the Lullaby volume bar. Note: When the lullaby function is enabled, the sound alarm will be automatically disabled. Warning: The sound of the lullaby may mask the baby's cries. |
|
Setting |
[Alarm]: You can set three alarms, each alarm can be enabled, the alarm time, and repeat reminder time as needed. [Screen off]: You can set the duration to 1min/3min/5min/Always on. [Night Vision]: Choose [Auto] or [Off]. When you choose [Auto], the camera will switch to day or night mode based on ambient brightness. [Time]: Set the date and time on the monitor. [Language]: Set the language on the monitor. [Temp unit]: Choose between °C and °F temperature units. [Anti-flicker screen]: If the baby monitor's screen is flickering, switch to another lighting frequency mode. [Reset]: Reset all settings to default. [Contact Us]: Contact Information. |
