Cleaning Instructions of Momcozy DeepClean Baby Bottle Washer|D8

1)1Before cleaning, pour out all residual milk from thebaby bottles, then place them inside the appliance for cleaning to ensure optimal cleaning results.

2)Press the latch on the bottle holder or nipple holder as illustrated to remove it from the lower rack.(Subject to usage)

3)Please refer to the standard layout diagram and correctly place all components to be cleaned as follows:

4)Place one detergent tablet into the appliance, then start the program to begin cleaning.

A. Bottles: Place them upside down, aligning the bottle mouth with the fixed spray column on the lower rack. Ensure the spray column is inserted into the bottle cavity to allow water flow to fully rinse off internal residues.

B. Nipples: Place them on the upper rack or on the nipple rack. It is recommended to separate the nipple from the screw cap when cleaning the nipple components.

When cleaning 8 sets of bottles, place the nipples on the upper rack.

When cleaning 4 sets of bottles, place the nipples on the nipple rack.

C. Gravity Balls: Secure them onto the latch of the spray nozzle on the upper rack to prevent them from moving during the wash cycle.

D. Other Accessories (e.g., caps, screw rings, etc.): Lay them flat on the upper rack.