| 1.Find the Right Spot |
Place the washer on a dry, flat surface near a sink. To prevent overheating and ensure the drying cycle works perfectly, keep the recommended clearance around the machine:
|
| 2.Prepare for Movement | Locate the silicone plugs on the bottom of the machine. Pop them out—this allows the machine to move more flexibly. |
| 3.Connect the Drain and Power | Connect one end of the drain hose to the back of the washer and place the other end securely in your sink. Plug the power cable into a grounded outlet. |
| 4. Fill the Tank | Fill the water tank with purified or distilled water. You can pour up to ~96 oz (~2,850 mL), but be careful not to exceed the MAX FILL line. |
| 5.Place Items | Correctly place the items to be cleaned according to the instructions：Item Placing Instructions of Momcozy DeepClean Baby Bottle Washer|D8 |
| 6.Add Detergent | Drop one detergent tablet into the lower rack. Do not skip this step; water alone cannot break down milk fats effectively. |
| 7.Start Machine | Connect the power supply, then press and hold the |
| 8.Select Mode | The default mode upon startup is: Normal Wash +Sterilize + Dry + Storage. |
| Press the | |
| Press the | |
| Press the | |
| Press the | |
| 9.Start Operation | After selecting the mode, press the |
| 10.Retrieve Items After Completion | After the drying cycle ends, the interior will be hot. To prevent burns, wait approximately 10 minutes before removing items. |
Important Notes:
- To stop operation, press and hold the
for about 2 seconds. The device will stop working after automatic drainage.
- If you need to add items during operation, first press the
to pause, then open the top lid to add items.
- The Drain Hose should extend horizontally, and its end must not be positioned above the midpoint of the machine's height.
- Do not use detergents that produce excessive foam (such as dish soap), as this can cause overflow or program errors.We recommend using only the dedicated detergent tablets.
- Do not add water directly into the cleaning chamber, as this may cause malfunctions.
- During the cleaning or drying process, the Drain Hose and the exhaust vent on the Top Cover may become hot; do not touch them to avoid burns.
Cleaning Duration Description
