Q1: How long does it really take for a cycle to finish?
Depending on the method you choose, the full wash, sterilize, and dry cycle takes approximately 90 to 100 minutes. Need it faster? Choose wash-only mode: Rapid Wash (~19 minutes) or Normal Wash (~29 minutes) without sterilizing and drying.
Q2: Can I load both plastic and glass bottles at the same time?
Of course. The D8 can safely handle both at the same time. Just make sure that the plastic bottles can handle high temperatures. Look for words like "dishwasher-safe" or "can sterilize" on the bottles. A lot of baby bottles work fine, but some cheaper plastics will bend when they get too hot. If you're not sure, look at the bottle's box.
Q3: How often should I really clean this myself?
Every 30 cycles or once a month, whichever comes first. To be honest, though, you'll need it more often—maybe every two to three weeks—if you use tap water. Too much time has passed if the spray pressure is low, there is white sticky stuff in the tank, or the bottles have a cloudy film on them after being washed. Plan ahead and write down the first of every month on your calendar.
Q4: Do I need to buy those tablets or can I just use regular dish soap?
No, dish soap is bad for the machine. It makes huge suds that leak out and hurt the pump system. The Momcozy tablets break down easily, work at high temperatures, and wash off totally. They are made to work with this machine's washing method in particular. One 60-pack keeps your protection good for two months.
Q5: After being washed, my bottles look cloudy. What is wrong?
Here are three common reasons:
- Mineral buildup in the machine (run a self-clean cycle to remove scale).
- The water from your tap is hard. Replace it right away with distilled or filtered water.
- The bottles aren't loaded properly. Make sure you put them in upside down so that the spray column is inside each one.
- Still cloudy? The detergent tablet might not be being used—the milk fat needs it to break down properly.