Bottle Washer - Unresponsive On/Off Button, Mode Button, or Indicator Lights|BS04

Solution

1. Clean and Dry the Control Panel and Hands 

   Wipe off any water droplets, milk residue, grease, or debris from the control panel with a soft dry cloth. Ensure your hands are clean and completely dry before pressing any buttons, as moisture or residue can block button function.

2. Test the Button Sequence Normally 

   Press the On/Off button once to power on the device, then press the Mode button to cycle through Auto, Sterilization Only, Drying Only, and Storage modes. Confirm the selected mode icon flashes normally before the cycle starts.

3. Power Cycle the Device 

   Unplug the BS04 bottle washer from the power outlet and wait for about 30 seconds. Plug it back into a wall outlet with matched voltage, then test the full button sequence again to check if the issue is resolved.

Note

If a button remains stuck, the indicators flicker, an icon never appears, the mode changes by itself, or the same control remains unresponsive after one restart, please contact Momcozy Customer Support with the following information:

• Product label
• A short video of the complete button sequence