Bottle Washer - Bottles or Accessories Remain Wet After Drying|BS04

Solution

1. Shake Off Excess Water and Load Items Correctly 

   Shake off large rinse droplets from bottles and accessories before placing them in the washer. Position bottles and hollow items with their openings facing downward, and do not nest or stack items inside one another.

2. Use the Correct Rack and Position Small Parts 

   For normal bottles, use the upper rack with side A facing upward. For tall bottles, use side B as shown in the supplied manual. Place nipples and small parts in positions where hot air can circulate around them.

3. Reduce Load Size and Leave Airflow Space 

   Do not overload the washer. Leave space around bottles, pump parts, nipples, valves, and the central airflow path. A full load, cool room temperature, or parts with narrow cavities may require longer drying time.

4. Extend Drying Time and Wait Before Opening 

   During Auto or Drying Only mode, long-press the Mode button for about 2 seconds to add 15 minutes of drying time. Allow the full cycle to complete, then wait about 5 minutes before opening the lid.

Note

If a correctly loaded reduced batch remains very wet after the added drying time, or the chamber never becomes warm during Drying Only, please contact Momcozy Customer Support with the following information:

• A short video of the indicator sequence
• Load type, room conditions, and selected mode details