First Use Workflow:
Assemble the device ＞Using the Device ＞ Remove the Parts and Cleaning
Assemble the Device:
Step 1: Install the Diversion Column on the underside of the collection cup.
Step 2: Insert the collection cup lid onto the bottom cover.
Step 3: Select the desired nozzle and install it onto the collection cup.
Step 4: Connect the collection cup to the main body's suction port using the air tube.
Using the Device:
Step 5: Long press the power button to start the device. Long press again to turn it off.
Step 6: Use the suction power adjustment buttons (< / >) to set the suction level (1-9 levels available).
Step 7: (Optional): Press the “” or “
” button to activate a soothing mode suitable for your baby.
Step 8: Gently place the nozzle inside the baby's nasal cavity to clean mucus. Do not insert beyond the connection of the collection cup lid and bottom cover.
Remove the Parts and Cleaning
Step 9: After cleaning, remove the collection cup from the device.
Step 10: After removing the collection cup components, rinse them promptly. (Note: The main body should not be washed with water!)
Step 11: After cleaning, use a soft cloth to dry the surface of the device and store it in a cool, dry place, away from direct sunlight.
Usage Tips:
For better results, if your baby's nasal mucus is dry, use a saline nasal spray to moisten it before using the aspirator.
The device will automatically turn off after 8 minutes of continuous use to prevent accidental prolonged operation.
