JavaScript is required

Operating Instructions of Nutri Smart Analog Baby Bottle Warmer|MW02

1. Preparations before operating

The first time you unpack the appliance,carefully remove and diispose of all packing materials. Disassemble and clean all parts before the first use and after every use.

2. Operating instructions

2.1 Warming Guidelines

The speed of warming a bottle or food container depends on the initial temperature of the contents, the size of the bottle/food container,etc.

2.2 Standby Mode

  1. If the knob points to off before powering on, the display panel will flash once and turn off automatically. In this case,the knob light is off.
  2. After plugging it in, rotate the knob from off to other positions and the display panel is off.Wake the display panel by pressing the power button and the knob turns solid yellow.
  3. When the knob turns solid white, the device will shut off automatically without one minute of running. Press to wake the display panel.

2.3 Warming Room Temperature/Refrigerated Bottles

  1. Place a bottle in the bottle warmer, one at a time.
  2. Fill with 90-160ml of water. 
  3. Rotate the knob and select the desired settings based on the milk volume, bottle material and bottle temperature, then press the power buttonor wait for 15 seconds to start a heating cycle. The knob flashes solid yellow.
  4. The bottle warmer beeps three times after a heating cycle, with a display of 60-minute countdown.
  5. The appliance has a memory function, and it will start with the settings you used last time.Insert another bottle and press the power buttontwice.
Note：
  • Never freeze glass containers,as glass may crack.
  • Never allow the liquid to overflow the appliance.
  • Unplug the appliance when not in use.
  • Gently swirl the bottle and sprinkle a few drops of milk onto inner wrist to test the temperature before feeding a baby.
  • Remove the bottle in time to avoid overheating milk and damaging the nutrients.

2.4 Food Heating Setting

  1. Place the food container in the bottle warmer, one at a ttime.
  2. Fill with 120ml of water in standby mode.
  3. Rotate the knob to the "Food" position and select the desired settings based on the container material and container temperature, then press the power butttonto start heating. The countdown timer will be displayed.
  4. The appliance automatically keeps warm for 1 hour after finishing alheating cycle.
  5. The appliance will automatically power off after keeping warm.

Note : Always check the temperature before feeding your baby. Gently mix the food and test the food temperature by putting a few drops on your inner wrist.

2.5 24H Constant Warming

  1. Place the bottle in the bottle warmer, one at a time.
  2. Fill with 160ml of water.
  3. Switch on and rotate the knob to the 24H position, then press the power buttonto start warming. The countdown timer will be displayed.
  4. The appliance will power off automatically after a 24H cycle.