- Before cleaning the device, you must unplug it from the power source and allow it to cool.
- Do not immerse the base, the supply cord or the plug in water or other liquids.
- Do not clean base under water tap.
- Use a soft damp cloth to clean the base and control panel.
- Never use abrasive pads to clean the plastic parts of the machine.
- The lid, accessory rack can be cleaned in hot soapy water.
- Mineral residue, particularly in hard water areas, may deposit on the stainless steel heating plate after a few sterilization cycles.To avoid scale build up, wipe the surfaces with a soft moist cloth after each operation.
- Deposits can be removed with scale removers or by leaving 60ml/2oz water and vinegar solution (50/50 water & vinegar mix) on the heating plate for approximately 30 minutes. The plate should then be wiped clean with a clean, dry cloth. Some discoloration spots may remain after cleaning with a vinegar solution,butthesearehare harmless.
- Do not use abrasives or solvents for cleaning; they may damage the appliance and the surface of the heating plate.
- Do not immerse the main compartment in water when cleaning it.
11. The inner surface, lid, upper rack, and base of this device can be washed with a cleaning agent and then rinsed with clean water. The outer surface of the device can be cleaned with a slightly damp cloth. Do not use corrosive detergents, cleaning agents with chemically abrasive powders, or hard metal wire brushes when cleaning this device, as this can damage the surface, affect its service life, and pose safety hazards.
12. Do not touch the center of the heating base with sharp objects or metal utensils, as this can cause electric shocks.
13. When the device is not in use for an extended period, please clean it thoroughly, return it to the packaging box,and store it in a well-ventilated and dry location to prevent moisture damage and ensure that it continues to function properly.