JavaScript is required

Operating Instructions of 8-in-1 Baby Bottle Steam Sterilizer|BS02

1.Preparations before Operation

please refer to:Set-up and Use of 8-in-1 Baby Bottle Steam Sterilizer|BS02

2.Method of Operation

2.1 AUTO (STERILIZE & DRY)

  1. Add 100-150mL/ 3.5-5oz of purified water to the machine, Place a clean baby bottle upside down in the main compartment and the nipple upside down on the upper rack.
  2. Power on the device, then press the key. The function light will then turn on. "The screen will begin to flash, allowing you to press to select other functions. You can also press+/- to adjust the operating time. If no other function operations are chosen, after 10 seconds the screen will stop flashing, and thefunction will be activated by default." Without any further operations, the sterilization phase ofmode will begin.
  3. After the sterilization process is completed, the machine will start the drying phase ofmode.

  4. Aftermode ends, the device will automatically switch to 24H mode. The 24H light will turn on, and it will start operating with a 24-hour countdown.

    Note:Inmode, press the +/-button to adjust the drying time.The sterilization time depends on the amount of water added,and the drying function is automatically turned on when the water boils dry.

2.2 DRY

  1. Place the clean bottle that needs to be dried upside down in the main compartment and the nipple upside down on the upper rack for drying.
  2. Power on the device, then press thebutton, followed by thebutton to selectmode. "The screen will begin to flash, allowing you to pressto select other functions. You can also press +/- to adjust the operating time. If no other function operations are chosen, after 10 seconds the screen will stop flashing, and thefunction will be activated by default."The device will then begin working if no other operations are performed. The default running time is 40 minutes.

  3. Aftermode is completed, the display will turn off. Wait for the baby bottle and nipple to cool down before removing them.

    Note: You can adjust the duration ofmode using the +and-buttons. Time range: 20-60 minutes.

2.3 STERILIZE

  1. Add 100-150mL/ 3.5-5.5oz of purified water to the machine.Place a clean baby bottle upside down in the main compartment and the nipple upside down on the upper rack.
  2. Power on the device, then press thebutton, followed by thebutton to selectmode. "The screen will begin to flash, allowing you to pressto select other functions. You can also press +/ - to adjust the operating time. If no other function operations are chosen, after 10 seconds the screen will stop flashing, and thefunction will be activated by default."The device will then begin working if no other operations are performed. The default running time is 15 minutes.

  3. Aftermode is completed, the display will turn off. Wait for the baby bottle and nipple to cool down before removing them.

    Note: You can adjust the duration ofmode using the +and - buttons; The time can be set within a range of 1-15 minutes.

2.4 THAW

  1. Add 150mL/ 5.5oz of purified water into the device and place the main compartment onto the base.
  2. Place the food that needs to be defrosted inside the main compartment, and then cover it with the lid.
  3. Power on the device, then press thebutton, followed by thebutton to selectmode. "The screen will begin to flash, allowing you to pressto select other functions. You can also press +/- to adjust the operating time. If no other function operations are chosen, after 10 seconds the screen will stop flashing, and thefunction will be activated by default.“The device will then begin working if no other operations are performed. The default running time is 25 minutes.

  4. After the food is defrosted, the screen will turn off. Then remove the lid and take the food out of the main compartment with tongs.

    Note: You can adjust the duration ofmode using the +and - buttons. Time range: 20-60 minutes.

2.5 FOOD

  1. Add 150mL / 5.5oz of purified water into the device and place the main compartment onto the base.
  2. Place the food that needs to be heated inside the main compartment, and then cover it with the lid.
  3. Power on the device, then press thebutton, followed by thebutton to selectmode "The screen will begin to flash, allowing you to press to select other functions. You can also press +/- to adjust the operating time. If no other function operations are chosen, after 10 seconds the screen will stop flashing, and thefunction will be activated by default."The device will then begin working if no other operations are performed. The default running time is 15 minutes.
  4. After the food is heated, the screen will turn off. Then remove the lid and take the food out of the main compartment with tongs.
     Note: You can adjust the duration ofmode using the+and-buttons. The time can be set within a         range of 10-60 minutes.

2.6 STORAGE

  1. Place a clean baby bottle upside down in the main compartment and the nipple upside down on the upper rack.
  2. Power on the device, then press thebutton, followed by the button to select the 24H function. "The screen will begin to flash, allowing you to pressto select other functions. The device will then begin working if no other operations are performed. The screen will count down from 24 (hours). The default working time is 24 hours, which cannot be adjusted. The 24-hour timing of 24H mode cannot be adjusted.However, you can press thebutton to cease its operations.

  3. After 24H mode is completed, the display will turn off. Wait for the baby bottle and nipple to cool down before removing them.

    Note: When the heating plate temperature sensor detects the temperature has exceeded the predefined limits, "E3" will appear on the display. The buttons will then be locked, and only the power button can be used. E3 will continue for 2 minutes, after which the device with automatically turn off.