Workflow:
Charging the main unit＞Select a grinding head＞ Power on and select a mode ＞Start to shape the nail
1. Charging the main unit
a. Connect the charging cable provided to the main unit.
b. Plug the USB into your computer or USB adapter (DC 5V 1.5A).
c. When the main unit is charging, the indicator light flashes white.
d. When the main unit is fully charged, the indicator light stays solid white.
e. It takes about 1 hour to fully charge the device. Charge the main unit as needed.
2. Select a grinding head
Take out a suitable grinding head and install it on the main unit.
Different grinding heads are different and applicable to different persons. From the left-hand of the set, from top to bottom, you can see the following in sequence:
The first is the Cylindrical Pad: Shaping Adult Nails
The second is the Metal Pad: Shaping Adult Nails
The Third is the Soft Pad: Polishing Adult Nails
The fourth is the Rough Grinding Head: For 12+ Months Toddler
The fifth is the Gentle Grinding Head: For 6-12 Months Baby
The sixth is the Fine Grinding Head: For 3-6 Months Infant
The seventh is the Super Fine Grinding Head: For 0-3 Months Infant
And the applicable information will be marked in the back of each grinding head. You can check it in the back.
3. Power on and select a mode
Long-press the power button to turn on the main unit, then short-press it to select the appropriate mode. Click and check how to select the appropriate mode?
4. Start to shape the nail
Place the grinding head close to the nail and adjust the position of the main unit until the nail is trimmed to the desired shape and length.