1.Inflation
|
1.Connect the hose to the nozzle on the pump |
2.Attach any compatible needle to the hose |
3.Insert the needle firmly into the air valve of the ball |
|
4.Begin inflating. For easier inflation, stand while pumping |
5.Once the target size is reached,quickly remove the needle and insert the plug |
6.Use the included tape measure to check the ball size |
2.Deflation
|
1.Use the plug remover to remove the plug |
2.Gently press the ball to allow air to release evenly |
3.Once fully deflated, fold as needed and store properly |
Important Notes :
- For optimal shape stability and user experience, it is recommended to inflate the ball to approximately 80% capacity for the initial inflation, then allow it to rest for 24-72 hours before fully inflating to the recommended size. PVC material requires time to stretch andset after the first inflation; this is a normal material characteristic.
- As the ball expands, internal air pressure increases and inflation will gradually require more effort.This is normal. Please inflate slowly and patiently until there recommended size is reached.
- A slight material odor may be present when the product is first unpacked. This is normal and harm-less. The odor will gradually dissipate after ventilation.
- Product dimensions and weight may vary slightly due to manual measurement and manufacturing tolerances. Please refer to the actual product for accuracy.
- Minor surface wrinkles may appear when the ball is not fully inflated or immediately after inflation. These wrinkles will naturally diminish with regular use.
- This product is a fitness and exercise aid only and does not make any medical or therapeutic claims. Individual experience and results may vary. The manufacturer does not guarantee that all users will achieve the same outcomes as described.
- Except as expressly stated in the limited warranty, this produict is provided "as is" and the manufacturer shall not be liable for injuries resulting from misuse or failure to follow instructions.
