Navigation: Scale Installation ＞ Product Use
1. Scale Installation
- Before using the scale, check the battery compartment and remove any plastic insulation strips.
- Insert the batteries (3 x 1.5V AAA) into the battery compartment.
- If you are replacing the batteries, make sure the positive and negative terminal contacts are properly aligned.
2. Product Use
Weighing in the baby mode
- Please ensure the scale is used on a hard and flat surface;
- Properly insert the batteries and assemble trays.
- Press and hold the "TARE" button until the display shows "0.000"
- After the display reads “0.000 kg”, long-press the "UNIT" button to adjust the orientation of the display readout;
- Safely and carefully place the baby onto the tray to measure weight.
