Applicable Scope:
Momcozy Bottle Washer BS03
Solution:
1. Fill the clean-water tank with room-temperature water to the required level without exceeding the maximum mark.
2. Remove and reinstall the tank and water-supply parts so they sit fully in place.
3. Unplug the BS03 and wipe only the visible, reachable water outlet, water-level detection surface, and the area around the float with a soft damp cloth.
4. Do not pry, remove, or press the float or sensor parts.
5. Refill the tank and start one program.
Note
If the same low-water warning returns, contact Momcozy manual support.
When contacting Momcozy Customer Support, provide the product model, Serial Number (SN), a clear photo or short video of the issue, and proof of purchase if available.
