Applicable Scope:
Momcozy White Noise : WN06
Solution:
1. Make sure the device has been charged with the specified power source for at least 60 minutes.
2. Hold Timer/Child Lock for about 3 seconds to turn the lock off, then test only the affected control using the action shown by its icon.
3. Turn off or disconnect the device and wipe the affected control area with a clean, dry cloth.
4. Check whether the control is stuck, sunken, loose, or visibly damaged, then test the same control once.
5. Restart the device once.
6. After it returns to normal operation, test the same control again.
Note
If the issue continues, contact Momcozy manual support and provide the product model, Serial Number (SN), a clear photo or short video of the issue, and proof of purchase if available.
