“Clean” Self-Cleaning Mode: In this mode, ensure both the water tank and the cup contain water for cleaning. The water tank will heat up, and the cup will stir. You may add a descaling tablet to the water tank, then pour 250mL of purified water into the blending cup. Reassemble the product and turn the lid clockwise to trigger the safety switch. You will then hear a click.
Press the function “” button to select the Cleaning “Clean” function. The cleaning “Clean” icon will turn on, while all other icons will turn off. The display will show a constant 10 (adjustable between 1-10 mins), as shown in Fig.22. The countdown will begin, and the motor will run for 30 seconds, then the heating cup will start heating. When the display counts down to 01, heating will stop, and the motor will resume operation. When the display shows 00, stirring will end, and the stirring icon will turn off. 5 beeps signal completion, after which, the product will automatically return to standby mode.
Once the function finishes, unplug the product, open the blending cup lid, remove the large cup, pour out the water, and wipe the cup body clean with a dry cloth (Fig.23). It is recommended to clean the product after each use.
To maintain 100% efficiency, descale this product once every week. Using purified or filtered water helps reduce scale buildup. To remove particles and scale from the water tank, please follow the descaling steps below:
1. Add a small piece of Momcozy descaling agent/citric acid (about 10g) into approximately 200mL of water, then pour the mixture into the water tank. Note: Alternatively, a solution of 150mL water mixed with 50mL white vinegar (a diluted acetic acid solution) can be used for descaling.
2. Activate the steam function; the icon will turn on, showing that the product is steaming.
3. After steaming for 5 mins, turn off the power.
4. Pour out the used vinegar (or acetic acid) solution from the water tank.
5. Rinse the water tank and blending cup thoroughly several times with clean water.
6. Before processing food again, pour 100-200mL of water into the water tank without adding any food to the blending cup, then run the product empty on steam mode for 10 mins to remove any remaining residue.
