Instruction for use of CocoSway 3D-Motion Electric Baby Swing|AW01

Plug the 5V 2A adapter plug into the socket with an output power supply of 100-240V. Plug the other end of the TYPE-C power cord into the TYPE-C insertion hole facing the right side of the product host. It is recommended to use only indoors,away from damp places.

2.1 Power

The control program starts standby. When the swing is working,touch this icon all functions will stop working, including music and timer. When the swing is working, touch this icon, power off. And the seat returns to its original position.

2.2 Timer

This function is combined with the plus(+) and minus(-) keys to control the timer of the swing. The timer is up to 45 minutes,increase 10 minutes for each touching, it should be 10min. 20min. 30min. 45min in a cycle. There are corresponding indicator numbers.

2.3 Music

Touch this icon to turn on/off music, you can switch songs through the plus(+)and minus(-) to select next or last song during music playing. If play in sequence, 8 songs loop, until the set countdown ends. The music player has an exit memory function. After turnirg off the power, it will start playing from track 1.

2.4 Volume

When the music turn on, the volume is medium level. Single touch the plus(+) to increase the volume, up to 5 levels; Single touch the minus(-) the volume will be reduced to the minimum 1level, no looping.

2.5 Swing mode

2.5.1 L&R swing mode:

This mode is an intelligent swing mode with 4 levels of speed and music can be switched. it moves left and right. Simulate the rhythm and trajectory of a baby rocking left and right while lying in the arms of its parents.

2.5.2 Up and down swing mode:

This mode is an intelligent swing mode with 4 levels of speed and music can be switched. it moves up and down. Simulate the rhythm and trajectory of the baby rocking up and down on the parents' shoulders.

2.5.3 M shape swing mode:

This mode is an intelligent swing mode with 4 levels of speed and music can be switched. it moves L&R and up&down simultaneously,imitating the movement trajectory of parents holding their baby while moving around.

2.5.4 Infinite shape swing mode:

This mode is an intelligent swing mode with 4 levels of speed and music can be switched. it moves L&R and up&down simultaneously.Mimics the wave pattern of the baby's free movement in the amniotic fluid of the womb.

2.5.5 O shape swing mode:

This mode is an intelligent swing mode with 4 levels of speed and music can be switched. It moves L&R and up&down simultaneously.Mimic the curved trajectory of parents holding their babies and swinging in circles.

2.5.6 U shape swing mode:

This mode is an intelligent swing mode with 4 levels of speed and music can be switched. it moves L&R and up&down simultaneously,like lying in mother's arms and playing happily.

2.6. During the swing process, when switching between different modes, the symbol light on the screen will flash for about 9 seconds. The light will stop flashing and the mode switch is successful.

2.7.When the swing and music are on state,if there is no operation for a long time, the product will automatically stop after 45 minutes.

The Scope of the application of the remote control is valid within 4meters of the mainframe control panel.
 

3.1When using the product remote control for the first time, please pull out the battery isolation film from the bottom of the battery and keep it aside, when not in use, you can insert the isolation film back to the original positieon to avoid power consumption and prolong the remote control device lifetime.

3.2 Power switchPress once to turn on the power and the product enters standby mode, press again to turn the power off.

3.3 Timer switchPress this button to turn on the timer function, the indicator light will light up, press this button to control the timing.

3.4 Swing mode switchAfter the power is turned on, press this button to start swinging. The default is the first mode 1st swing speed.

3.5 Next mode switchWhen in swinging process, press this button to enter the next swing mode. There are 6 modes in total, which can be switched in turn.

3.6 Swing speed +Press this button once, the swing speed will increase by one gear,and the digital display lights up and flash. There are are 4 speeds in total. Once reaching to the 4th speed will have no effect even keep pressing this switch.

3.7 Swing speed -Press this button once,the swing speed will decrease by on gear, and the digital display lights up and flash, once it reach the 1st speed if keep pressing this switch,it stop swinging.

3.8 Music Press this button and the music will play automatically. Press again to turn off the music. The song plays in a repeating loop in the default music format.

3.9 Next song When music is playing, this key is only used to select the next song. Press once and the music will automatically switch to the next song.

3.10 Volume + When music is playing, the default volume is medium. Press this button and the volume will automatically increase by one level until it reaches the maximum level.

3.11 Volume -When music is playing, the default volume is medium.Press this button and the volume will automatically decrease by ofne level until it reaches the minimum level.

NOTE

Operation method of remote control：When using,make sure the remote control facing up,and the infrared light is facing the engine machine.

The effective control distance of the remote control is within 35° on both sides of the range of 4 meters from the front of the engine machine.

Failure to operate as specified may cause the remote control to malfunction.

After pulling up the handle of the main frame, you can adjust the seat angle freely. After adjusting to the appropriate Angle, pull the handle downward to lock the seat, and the seat angle adjustment can be completed.(The highest angle is 28° , the lowest angle is 15°)

Hold the seat indicated by the arrow with both hands (Fig. 1) to rotate, only 90 degrees to the left or right (Fig.2), the seat cannot be rotated 360 degrees,otherwise the product may be damaged.