1.Bassinet
- Removable Parts (marked in red in the image below)
- Removable black fabric above the bassinet
- White sleeping pad cover (the pad inside the white sleeping pad is not recommended for washing)
- Maintenance tips
- For the removable black fabric and white sleeping pad cover, it is recommended to wash with warm water (not exceeding 30°C) and a small amount of neutral detergent.
- For other fabrics that cannot be removed, it is recommended to use a soft cloth/brush dipped in warm water and a small amount of neutral detergent to spot clean them.
- After cleaning, wipe again with a clean, damp cloth to remove any residual detergent.
2.Toddler Seat
- Disassembly Steps: Please refer to the marked locations in the diagram and open the corresponding zippers, elastic cords, buttons, and Velcro in sequence, then remove the seat fabric. When disassembling, please be careful not to pull forcefully to avoid damaging the connecting parts.
- Cleaning the seat cover: It is recommended to use a soft cloth/brush dampened with warm water and a small amount of neutral detergent to spot clean the area.After cleaning, wipe again with a clean, damp cloth to remove any residual detergent, then allow it to air dry.
- After drying, reinstall the seat cover following the reverse steps of disassembly. After installation, please ensure that the zipper, elastic cord, buttons, and Velcro are properly secured, and that the seat cover is flat and firmly installed before use.
Note:
- After cleaning, be sure to place all cleaned parts in a well-ventilated, cool place to dry completely before reinstalling and using. Do not install the seat cover while it is still damp to prevent mold or odors from developing due to moisture residue.
- Maximum washing temperature 40°C, normal process.
- Do not bleach.
- Tumble drying possible, drying at lower temperature, maximum exhaust temperature 60°C.
- Do not iron.
- Do not dry clean.
