First Use Workflow:
Assemble the device ＞Remove and Clean the parts ＞ Assemble Mucus Collector
Assemble the device
- Align the anti-backflow silicone cover with the storage bin.
- Connect the suction chamber cap to the storage bin.
3. Select the appropriate nozzle and secure it to the top of the suction chamber cap.
4. Insert the assembled suction chamber into the main body to ensure it fits tightly.
Using the Device
you can refer to Appearance Function Description of Baby Nasal Aspirator long battery life (BN02) to check the function.
Cleaning and Maintenance
Before carrying out any cleaning or maintenance work, always make sure that the appliance is disconnected from any power supply by unplugging the power cord from the socket outlet.
-
Regular cleaning:
1. After use, rotate to the right and pull the entire nasal suction compartment up and out to separate it from the main unit
2. Separate the storage slot from the silicone cover of the suction tip.
3. Remove the silicone tip and the anti-backflow silicone seal ring separately.
4. Place them in water or warm soapy water to clean them. If necessary, use white vinegar and alcohol to disinfect each component. After washing, dry them with clean tissues or put them in a ventilated place to air dry them.
- Self-cleaning:
1. Open the silicone plug at the bottom and immerse the silicone suction nozzle in clean water to clean the main unit while powered on (at any suction level).
2. Do not turn off the device after self-cleaning, and keep the bottom plug open to empty the water stain inside.
Caution: Avoid water splashing on your clothes during device self-cleaning.
Note:
The device cannot be turned on while charging. Do not use it while charging.
Avoid water splashing on your clothes during device self-cleaning.
Do not submerge the device in water. Empty the water stain inside the device after self-cleaning.
Never allow the collected nasal discharge to exceed 1/2 of the entire storage capacity, or it will overflow.
